CHZMY - NPU 550646 ELASTOLLAN S90A10 DOMESTIC
- MSDS: CHZMY
- Manufacturer: BASF WYANDOTTE CORP
- Product Name: NPU 550646 ELASTOLLAN S90A10 DOMESTIC
- National Stock Number: 6850-00F056709
Product Identification
Product ID:NPU 550646 ELASTOLLAN S90A10 DOMESTIC
MSDS Date:01/27/1996
FSC:6850
NIIN:00F056709
Status Code:A
MSDS Number: CHZMY
Responsible Party
WYANDOTTE, MI 48192-3729
US
Emergency Phone: 800-832-4357/800-824-3156
Info Phone: 800-824-3156/800-832-4357
Cage: 83339
Contractor
Telephone: 313-246-6100
Cage: 83339
Ingredients
POLYESTER THERMOPLASTIC POLYURETHANE ELASTOMER
Fraction By Weight: 100%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY RESULT IN RESPIRATORY
IRRITATION. SKIN: MAY CAUSE THERMAL BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS, GI DISTURBANCES.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: RINSE W/RUNNING WATER FOR 15
MINS. INGESTION: DILUTE W/WATER & INDUCE VOMITING. NEVER GIVE
FLUIDS/INDUCE VOMITING IF UNCONSCIOUS/HAVING CONVULSIONS.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTIONIN ALL
CASES.
Fire Fighting
Flash Point:572F
Extinguishing Media:WATER FOG, FOAM, CO2/DRY CHEMICAL EXTINGUISHING
MEDIA.
Fire Fighting Procedures:USE SCBA & TURNOUT GEAR. AVOID BREATHING
VAPORS/FUMES/BURNING PRODUCTS.
Accidental Release
Spill Release Procedures:DON'T DISCHARGE INTO WATERWAYS/SEWER SYSTEMS
W/OUT PROPER AUTHORITY.
Handling
Handling and Storage Precautions:AVOID EXTREME HEAT. PROTECT FROM
MOISTURE DURING TRANSPORTATION & STORAGE.
Other Precautions:AVOID DUST ACCUMULATION. PELLET-HANDLING EQUIPMENT
SHOULD BE GROUNDED TO PREVENT BUILDUP OF ELECTROSTATIC CHARGE.
PELLETS ON FLOOR MAY BE SLIPPERY & CAUSE FALLS.
Exposure Controls
Respiratory Protection:IF DUSTS ARE GENERATED, WEAR AN APPROVED DUST
RESPIRATOR.
Ventilation:LOCAL EXHAUST TO CONTROL DUST.
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:COVERALL, APRON, BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:302F-446F
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:DICED; ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT, MOISTURE.
Hazardous Decomposition Products:CO, CO2 & CYANIC ACID.
Disposal
Waste Disposal Methods:INCINERATE/BURY IN A LICENSED FACILITY,
IAW/FEDERAL, STATE & LOCAL REGULATIONS. CONTAINER DISPOSAL: UNUSED
MATERIAL & EMPTY CONTAINERS MUST BE DISPOSED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.